78 results in 0.0034 seconds.
-
SystemPulse started a topic Quality team should see reports and downtimes but must not change anythingin Proveris OEEQuality team should see reports and downtimes but must not change anything
Our quality department wants access to Proveris. They need the dashboard, the reports and the downtime list, and they would like to export reports themselves.... -
HMIDesign started a topic Operators speak different languages: which interface languages are available?in HelpOperators speak different languages: which interface languages are available?
We are a plant in Germany with a mixed team: many operators prefer German, some Russian, and our engineering team and the group headquarters work in English.... -
DataStream started a topic New EV chargers in the car park: how do we watch the load peaks they cause?in LogiphaseNew EV chargers in the car park: how do we watch the load peaks they cause?
We installed eight EV charging points in our company car park, fed from an existing sub-distribution panel. Since then, the panel's main breaker has tripped... -
Building management system wants to read values from our SCADA via Modbus
Our facility team uses a separate building management system (BMS) and they want about 30 values from our Omnivex SCADA: chiller status, a few temperatures... -
DataForge started a topic Someone changed a setting over the weekend: can I see who did it and when?in Proveris OEESomeone changed a setting over the weekend: can I see who did it and when?
On Monday morning the numbers for one machine looked strange, and after some digging we found that a setting had been changed during the weekend. Several... -
LogicAutomation started a topic We use the desktop Proveris client: what changes if we move to the web version?in HelpWe use the desktop Proveris client: what changes if we move to the web version?
We have used Proveris OEE with the desktop client for about two years on 10 machines. I see that new videos and forum answers mostly refer to the web... -
How can we see when the backup generator started and how long it ran?
Our site has a diesel backup generator that starts automatically during grid outages. At the moment we only know it ran because someone checks the fuel... -
Showing 12 remote pump stations on a map page with a popup for each
We are a small municipal water utility with 12 pump stations spread over the district. Each station already has its own detail page in our Omnivex SCADA... -
Performance shows 140% on one line since we changed products
On our filling line the Performance gauge has been showing values between 130% and 145% for the last three days. Before that it was around 85%, which... -
Monthly, 6-month or yearly subscription, and can we add lines later?
We are close to a decision for Proveris OEE. On the pricing page I saw that I can choose a subscription period and the number of lines, and the summary... -
Live single-line diagram: where should breaker on/off status come from?
We are preparing an energy monitoring project with about 15 analyzers in our main and sub-distribution panels. Management would like a live single-line... -
Daily tag report every morning without anyone pressing a button
Every morning one of our operators opens the Tag Report, selects about 20 tags (flows, pressures and tank levels), sets the range to the last 24 hours... -
LogicAutomation started a topic Added a new machine in the web version but its production count stays at 0in Proveris OEEAdded a new machine in the web version but its production count stays at 0
We bought a second packaging machine and I added it from the MACHINES page with "Add Machine". The card appeared right away, which was nice,... -
LogicAutomation started a topic Energy cost on the dashboard looks wrong, where do I set the price per kWh?in Proveris OEEEnergy cost on the dashboard looks wrong, where do I set the price per kWh?
Each of our presses has an energy meter and the kWh value is already read into Proveris as a tag. The dashboard shows an energy summary with a cost value,... -
DataStream started a topic Cause import from Excel skips rows: "Equipment not found", "Station not found"in Proveris OEECause import from Excel skips rows: "Equipment not found", "Station not found"
We have a list of about 120 downtime causes from our old paper system and I want to load them into Proveris OEE web instead of typing them one by one....
