78 results in 0.0040 seconds.
-
How can I limit which SCADA pages each user can open?
Our project has about 25 pages: overview, each process area, a maintenance page with motor run hours, and a settings page with setpoints. Right now everyone... -
Alarms appear on the screen but no email is sent
I configured high-pressure and low-level alarms for our boiler room in the Alarm Editor. They work: they show on the Server Alarm Panel and on the clients.... -
Secondary SCADA server: what must be identical, and how fast does it take over?
Our water pumping station runs on a single Omnivex SCADA server. After a disk failure last month we had no monitoring for six hours, so management approved... -
MQTT Client channel can't connect to our existing broker on another server
Our IT team already runs a Mosquitto broker on a Linux server that collects data from some IoT sensors (humidity, compressor room temperature). I wanted... -
RS-485 meters behind a serial-to-Ethernet converter: Modbus TCP or RTU over TCP?
We have eight RS-485 devices (flow meters and two temperature controllers) on one serial line. The SCADA PC is 150 m away, so we installed a serial-to-Ethernet... -
DataStream started a topic Can the Proveris web interface run on a different PC than the Proveris server?in Proveris OEECan the Proveris web interface run on a different PC than the Proveris server?
Our IT department wants the Proveris server (the part that talks to the PLCs) to stay on a PC in the production network, but the web interface should... -
ProcessPilot started a topic Dashboard frozen for one line, Server Status shows the channel in "Error"in Proveris OEEDashboard frozen for one line, Server Status shows the channel in "Error"
Since this morning, the OEE values for Line 3 are not moving, while the other lines are fine. The machine is running. I opened the Server Status page... -
SystemPulse started a topic How deep should the equipment hierarchy be? Operators can't find causes on kioskin Proveris OEEHow deep should the equipment hierarchy be? Operators can't find causes on kiosk
Our maintenance team built a very detailed equipment tree on the EQUIPMENT page: Machine > Unit > Assembly > Component, sometimes five levels... -
DataForge started a topic What does the Production Analyst need to work, and where does our data go?in Proveris OEEWhat does the Production Analyst need to work, and where does our data go?
I saw the PRODUCTION ANALYST menu in the web version. The idea of asking "Which line stopped the most last night?" instead of building a report... -
"Write value" on Live > Tag is not available for my user
During commissioning I want to test a few PLC bits from Proveris, for example resetting a counter tag after a trial run. On the LIVE > TAG page I can... -
SignalFlow started a topic Downtime and report times are 3 hours off after moving the server to a new PCin Proveris OEEDowntime and report times are 3 hours off after moving the server to a new PC
We moved Proveris OEE to a new server PC over the weekend (new Windows install, new PostgreSQL install, database restored from backup). Everything is... -
Kiosk won't accept wastage: "No active work order"
Our operators count rejected parts in a bin and enter the number at the end of each hour. On the kiosk Wastage screen, some of them get "No active... -
ShiftAnalyst started a topic One kiosk tablet, three operators a day: how should sign-in work at shift change?in Proveris OEEOne kiosk tablet, three operators a day: how should sign-in work at shift change?
We mounted one tablet per line and open the Proveris web kiosk on it. To keep it simple we created a single user called "line1" and everyone... -
ProcessPilot started a topic Hundreds of downtimes stuck under "No Reason Assigned": how do we clear them?in Proveris OEEHundreds of downtimes stuck under "No Reason Assigned": how do we clear them?
We've been running Proveris OEE web for about a month. On the DOWNTIMES page, the "No Reason Assigned" tab now has more than 300 records. Most... -
How do I make operators see only the machines on their own line?
We have 14 machines in two halls. Operators in Hall A complain that the dashboard and kiosk are cluttered with Hall B machines, and last week someone...