78 results in 0.0045 seconds.
-
Alarm and email when the oil temperature tag goes above 65 °C
We already read the hydraulic oil temperature of our presses into Proveris as a tag, and I can see the value on LIVE > TAG. Maintenance would like... -
How do I make a button that writes a setpoint value to the PLC?
I'm building my first Omnivex SCADA project for a mixing station. Reading values works fine. Now I need two things on the operator page: a button that... -
Can operators acknowledge alarms with a comment from the web interface?
In the old desktop client our operators acknowledged alarms and wrote a short note about what they did. Now we are moving to the web version, and the... -
Adding a pressure trend to the overview page: live chart or tag report?
Operators on our boiler house overview page currently see only numbers for steam pressure and feedwater temperature. They asked for a small chart next... -
PlantInsight started a topic Every 20-second jam creates a downtime record that operators must explainin Proveris OEEEvery 20-second jam creates a downtime record that operators must explain
On our labeling machine the product sometimes jams for 10 to 30 seconds and the operator clears it by hand. Each of these short stops shows up as a separate... -
Each area supervisor should only see the alarms of their own area
Our plant has three areas (raw material, production, utilities) and about 250 alarms in one Omnivex SCADA project. The area supervisors complain that... -
Where does the shift target on Shift Monitoring come from?
Our shift leaders started using the SHIFT MONITORING page on a big screen next to the line, and they like it. But there are some questions I couldn't... -
SCADA database grew to 180 GB in a year: which log settings should I check?
Our Omnivex SCADA project has around 1,500 tags. The server's disk is almost full and our IT department found that the database has grown to about 180... -
How do I compare two identical lines side by side in the report?
We have two injection molding lines that are the same model and run the same products, but Line 2 consistently produces less. Management asked me for... -
Operators on site, managers in the office: energy data in a browser?
We are evaluating an energy monitoring solution for two plants. The maintenance team on site would work with the monitoring screens all day, but our energy... -
Can the monthly report use our own Excel layout instead of the standard table?
Our management gets a monthly production and utilities report in a fixed Excel layout: company header, a summary block at the top, then several tables.... -
ProcessPilot started a topic Trial is ending next week: how do we activate the license on our server?in Proveris OEETrial is ending next week: how do we activate the license on our server?
We have been testing Proveris OEE on four machines for a few weeks and management approved the purchase. The web interface now shows a message that the... -
DataForge started a topic New engineer taking over our OEE system: where should they start learning?in HelpNew engineer taking over our OEE system: where should they start learning?
The engineer who set up our Proveris OEE system is leaving the company next month. A younger colleague will take over, and they have a PLC background... -
Voltage alarms: phase-to-neutral or phase-to-phase, and what limits?
Our analyzers provide both phase-to-neutral voltages (L1N, L2N, L3N) and phase-to-phase voltages (L12, L23, L31). We want to set voltage alarms because... -
A pump was stopped at night: can SCADA tell us when the client was used?
Last week a transfer pump was stopped at around 2 a.m. and a tank ran low. The night operator says they didn't touch anything, and the PLC shows the stop...